Invested with all the latest technology, the TFSN Series has brought both the high quality and cost reduction to reality.
User-Friendly, Quieter Operation
Latest noise reduction developments help create a quiet and pleasant working environment for operators.
Memory
Standard memory capacity : 2,000,000 stitches to register Max.99 designs.

Condition Memory <PAT>
Stitching conditions (design start position, color sequence etc.) can be output to a floppy disk along with the design data. The saved stitch conditions are applicable to reproduction as they reduce setting time.
Scale Up / Down, Rotate
You can scale your designs down to 50% or up to 200% in increments of 1%, and rotate in 1-degree increments.
Automatic Repeat
A design can be automatically repeated up to 99 times both vertically and horizontally. The repetition can be set for continuous operation.
Design Editing
Modify, insert or delete your embroidery design data stitch by stitch.
Satin Stitch Length Compensation
The embroidery finish of satin of stitches may sometimes differ in values, compared with original design data, depending on the embroidery conditions like very stretchy fabrics. Satin stitch length can be increased or decreased for compensation with ease on the operation panel.
Cleanup function
A simple setting on the operation panel removes unnecessary fine stitches (0.5mm long or less) contained in the design data. Removal of these fine stitches will decrease thread breakage that leads to decreased production due to machine downtime.
Frame Back / Forward
Frame Back / Forward is available in units of stitches, color change or designated stitch count.
Production management function
Production management information like stitch counts of memorized designs, time required for embroidery process, remaining stitches up to preset halt (preliminarily set stop position) can be checked on the operation panel. This will help you get a better grasp of production efficiency.
Embroidery space trace function
This function moves only the frame on the contour of an embroidery design and helps you check if a design will fit in a designed embroidery space before sewing it. This will prevent needles from hitting the frame by mistake during the embroidery operation.
Origin Return
The frame can be either manually or automatically returned to the design starting point (while the machine is stopped), even if the end point is different from the starting point.
Automatic Offset / Manual Offset
Facilitates applique fabric placement and frame changing.
Marking
Design starting point can be easily positioned for placement of embroidery.
Automatic Upper / Under Tread Trimming Device <ATH>
Automatically operates by commands in the design data.
Power Failure Control Measures
Even if the power supply is cut off in the middle of embroidery due to power failure or other reasons, the embroidery position is saves in memory so the machine can resume with a simple operation after the machine is reset. The embroidery process can be resumed in the position just before the power failure to save product loss.
 

More info